Ordering no:
Female panel mount connector, black
Female panel mount connector, black, Series 620 MED
Available numbers of contacts
99 9208 490 03
Snap-In IP67, subminiature female panel mount connector, Contacts: 3, Shielding is not possible, dip-solder, IP67
Snap In, series 620, Connectors for medical applications
| Artikelnummer |
99 9208 490 03
|
| Connector locking system | snap |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Upper temperature | 85 °C |
| Lower temperature | -25 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Material of housing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.276 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 9212 490 04
Snap-In IP67, subminiature female panel mount connector, Contacts: 4, Shielding is not possible, dip-solder, IP67
Snap In, series 620, Connectors for medical applications
| Artikelnummer |
99 9212 490 04
|
| Connector locking system | snap |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Upper temperature | 85 °C |
| Lower temperature | -25 °C |
| Rated current (40°C) | 2,5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Material of housing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.443 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 9216 490 05
Snap-In IP67, subminiature female panel mount connector, Contacts: 5, Shielding is not possible, dip-solder, IP67
Snap In, series 620, Connectors for medical applications
| Artikelnummer |
99 9216 490 05
|
| Connector locking system | snap |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Upper temperature | 85 °C |
| Lower temperature | -25 °C |
| Rated current (40°C) | 2 A |
| Rated voltage | 63 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Material of housing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 6 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 9228 490 08
Snap-In IP67, subminiature female panel mount connector, Contacts: 8, Shielding is not possible, dip-solder, IP67
Snap In, series 620, Connectors for medical applications
| Artikelnummer |
99 9228 490 08
|
| Connector locking system | snap |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Upper temperature | 85 °C |
| Lower temperature | -25 °C |
| Rated current (40°C) | 1 A |
| Rated voltage | 63 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Material of housing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 6 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?