Ordering no:
Female panel mount connector, dip-solder, screwed from front, 2 - 8 contacts
Female panel mount connector, dip-solder, screwed from front, 2 - 8 contacts, Series 581/ 680/ 682
Available numbers of contacts
Variants for number of contacts 2
Variants for number of contacts 3 DIN
Variants for number of contacts 4
Variants for number of contacts 5
Variants for number of contacts 5 (Stereo)
Variants for number of contacts 6 DIN
Variants for number of contacts 7
Variants for number of contacts 8 DIN
09 0304 90 02
M16 IP40 female panel mount connector, Contacts: 2, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0304 90 02
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.599 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0304 99 02
M16 IP40 female panel mount connector, Contacts: 2, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0304 99 02
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.589 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0308 90 03
M16 IP40 female panel mount connector, Contacts: 3 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0308 90 03
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.687 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0308 99 03
M16 IP40 female panel mount connector, Contacts: 3 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0308 99 03
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.687 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0312 90 04
M16 IP40 female panel mount connector, Contacts: 4, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0312 90 04
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.821 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0312 99 04
M16 IP40 female panel mount connector, Contacts: 4, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0312 99 04
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.801 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0316 90 05
M16 IP40 female panel mount connector, Contacts: 5, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0316 90 05
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.859 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0316 99 05
M16 IP40 female panel mount connector, Contacts: 5, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0316 99 05
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.854 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0320 90 05
M16 IP40 female panel mount connector, Contacts: 5 (Stereo), Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0320 90 05
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.695 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
09 0320 99 05
M16 IP40 female panel mount connector, Contacts: 5 (Stereo), Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0320 99 05
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.695 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
09 0324 90 06
M16 IP40 female panel mount connector, Contacts: 6 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0324 90 06
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.972 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0324 99 06
M16 IP40 female panel mount connector, Contacts: 6 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0324 99 06
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.942 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0328 90 07
M16 IP40 female panel mount connector, Contacts: 7, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0328 90 07
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 9.067 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Downloads
Gegevensblad
CAD files
09 0328 99 07
M16 IP40 female panel mount connector, Contacts: 7, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0328 99 07
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 9.032 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Downloads
Gegevensblad
CAD files
09 0474 90 08
M16 IP40 female panel mount connector, Contacts: 8 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0474 90 08
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.907 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
09 0474 99 08
M16 IP40 female panel mount connector, Contacts: 8 DIN, Shielding is not possible, dip-solder, IP40
M16, series 680, Miniature connectors
| Artikelnummer |
09 0474 99 08
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Material of housing | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 8.907 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?