Ordering no:
Male panel mount connector, dip-solder, screwed from front with shielding sheet (10 mm)
Male panel mount connector, dip-solder, screwed from front with shielding sheet (10 mm), Series 712/702
Available numbers of contacts
09 0403 35 02
M9 IP67 male panel mount connector, Contacts: 2, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0403 35 02
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 4 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 10.292 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0407 35 03
M9 IP67 male panel mount connector, Contacts: 3, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0407 35 03
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 4 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 10.417 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0411 35 04
M9 IP67 male panel mount connector, Contacts: 4, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0411 35 04
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 10.276 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
09 0415 35 05
M9 IP67 male panel mount connector, Contacts: 5, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0415 35 05
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 10.684 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 0423 35 07
M9 IP67 male panel mount connector, Contacts: 7, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0423 35 07
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 1 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 10.696 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
09 0427 35 08
M9 IP67 male panel mount connector, Contacts: 8, shieldable, dip-solder, IP67
M9, series 712, Subminiature connectors
| Artikelnummer |
09 0427 35 08
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 1 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | II |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PA (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 11.04 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?