Beschikbaar aantal contacten
99 4705 00 03
Push-Pull cable connector, Contacts: 3, 3,0 - 4,0 mm, Shielding is not possible, solder, IP67
Push Pull, series 420, Subminiature connectors
| Artikelnummer |
99 4705 00 03
|
| Connectorvergrendeling | Micro Push-Pull |
| Aansluiting | solder |
| Draaddikte (mm) | 0,14 mm² |
| Draaddikte (AWG) | 26 |
| Kabeluitgang | 3,0 - 4,0 mm |
| Beschermingsgraad | IP67 |
| Mechanische levensduur | > 1000 Mating cycles |
| Bovengrenstemperatuur | 80 °C |
| Ondergrenstemperatuur | -40 °C |
| Nominale stroom (40 °C) | 1 A |
| Nominale spanning | 125 V |
| Nominale stootspanning | 1500 V |
| Vervuilingsgraad | 2 |
| Overspanningscategorie | II |
| Materiaalgroep | II |
| Volumeweerstandsvermogen | ≤ 8 mΩ |
| Materiaal van het contact | CuZn (brass) |
| Contactbedekking | Au (gold) |
| Materiaal van de contactbasis | PA |
| Materiaal van de behuizing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.66 |
Veiligheidsinstructies
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Informatieblad
CAD-bestanden
99 4709 00 04
Push-Pull cable connector, Contacts: 4, 3,0 - 4,0 mm, Shielding is not possible, solder, IP67
Push Pull, series 420, Subminiature connectors
| Artikelnummer |
99 4709 00 04
|
| Connectorvergrendeling | Micro Push-Pull |
| Aansluiting | solder |
| Draaddikte (mm) | 0,14 mm² |
| Draaddikte (AWG) | 26 |
| Kabeluitgang | 3,0 - 4,0 mm |
| Beschermingsgraad | IP67 |
| Mechanische levensduur | > 1000 Mating cycles |
| Bovengrenstemperatuur | 80 °C |
| Ondergrenstemperatuur | -40 °C |
| Nominale stroom (40 °C) | 1 A |
| Nominale spanning | 125 V |
| Nominale stootspanning | 1500 V |
| Vervuilingsgraad | 2 |
| Overspanningscategorie | II |
| Materiaalgroep | II |
| Volumeweerstandsvermogen | ≤ 8 mΩ |
| Materiaal van het contact | CuZn (brass) |
| Contactbedekking | Au (gold) |
| Materiaal van de contactbasis | PA |
| Materiaal van de behuizing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.729 |
Veiligheidsinstructies
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Informatieblad
CAD-bestanden
99 4713 00 05
Push-Pull cable connector, Contacts: 5, 3,0 - 4,0 mm, Shielding is not possible, solder, IP67
Push Pull, series 420, Subminiature connectors
| Artikelnummer |
99 4713 00 05
|
| Connectorvergrendeling | Micro Push-Pull |
| Aansluiting | solder |
| Draaddikte (mm) | 0,14 mm² |
| Draaddikte (AWG) | 26 |
| Kabeluitgang | 3,0 - 4,0 mm |
| Beschermingsgraad | IP67 |
| Mechanische levensduur | > 1000 Mating cycles |
| Bovengrenstemperatuur | 80 °C |
| Ondergrenstemperatuur | -40 °C |
| Nominale stroom (40 °C) | 1 A |
| Nominale spanning | 125 V |
| Nominale stootspanning | 1500 V |
| Vervuilingsgraad | 2 |
| Overspanningscategorie | II |
| Materiaalgroep | II |
| Volumeweerstandsvermogen | ≤ 8 mΩ |
| Materiaal van het contact | CuZn (brass) |
| Contactbedekking | Au (gold) |
| Materiaal van de contactbasis | PA |
| Materiaal van de behuizing | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.806 |
Veiligheidsinstructies
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Informatieblad
CAD-bestanden
Contact opnemen met de klantenservice
Hebt u vragen over onze producten of wenst u een individuele offerte?